Brandt wte 1277 manual manual#

The machine does not show any malfunctions, it works in the normal mode, completely executing all the cycles.

As a result, the laundry is not finished. Water does not heat up to the required parameters, but the program is still started. All the main programs that require heating the water to a relatively high temperature, do not work correctly. Washing in the washing machine automatic machine Brandt WTD 1276 in the past few weeks has become substandard. The machine was purchased five years ago, but up to this point has never broken down and was not repaired. An error is displayed on the control panel. The water does not heat up to the temperature set by the mode, the drum does not start. The program is selected and started, but after the water is poured into the tank and the heating is short, the device turns off, going into the waiting mode. The washing machine Brandt WTC 0823 K does not work today all types of washing, which require a long time and a sufficiently high water heating in the tank. If you specify a rinse with a separate mode, then the stage is performed completely before such a problem was not, although the machine was purchased seven years ago and was operated very intensively all this time. Prior to rinsing on the main stage, failures do not happen.Īfter stopping, the device displays a technical error on the panel, and then goes into standby mode. Recently, with any washing mode, the washing machine Brandt WT 128 stops rinsing a few minutes after the start of the cycle. The machine was bought six years ago, before that there was a change of the electric heating element.

Brandt wte 1277 manual manual#

Download BRANDT WTE1271K 5X0614 service manual & repair info for electronics experts. Quality of washing has strongly fallen, the owner of technics has temporarily stopped using the equipment. As a result, too much foam is formed in the tank from the detergent powder, and the laundry remains semi-dry. When the selected washing program starts, the Brandt WT 128 starts to fill the water in the tank, but it does not fill it enough, there is not enough water for high-quality washing. The device was purchased four years ago, during the operational period before the occurrence of this fault never broke. Separately rinse and spin the laundry, too, can not be started. A fault is detected when any wash mode is selected. However, after this the machine does not start, the drum does not rotate. Heating occurs correctly, up to the required temperature. In the washing machine Brandt WTD 1271K, after selecting the program and starting the equipment, water enters the tank and starts to heat up.